HIKMICRO THUNDER PRO TQ50C HM-TR16-50XG/W-TQ50C 640x512 50Hz 50mm 2600m with reticle thermal imaging attachments

Toote kirjeldus inglise keeles:

The Hikmicro TQ50c is a thermal imaging attachment at the highest level. Compact, handy with an intuitive operation. The dual-use device offers the user state-of-the-art technology and is of very high quality. The assembly is a clip-on system that transforms the device from a handheld device into an attachment system in a short time. The successor to the proven TH35c leaves nothing to be desired and you can tell that the development was close to the end user. The TQ50c is a powerful attachment with a large detector with 640x512 pixels and a detector sensitivity of <35mK. The image frequency is 50 Hz and a pixel pitch of 12 μm. The Thunder series to which the TQ50c belongs is Hikmicro's premium line and the differences in display are noticeable. All products in this series with a "C" at the end are attachments. The design and operation of the TH35c are the same as the previous model. Due to the well-known and well thought-out structure of the operating elements, the device can also be operated blind. The Hikmicro Thunder series is technically the company's premium product and has a high-resolution VOx sensor that works with 640x512 pixels. A sensitive sensor recognizes even the slightest heat signatures and thus creates a good overview of the current conditions. The image can be displayed in four well-coordinated color palettes and can thus be individually adapted to the hunting ground conditions. The picture is full, rich in contrast and sharp. The heat signatures are presented to the user on an OLED HD display (1280x960). Focusing is done in the usual binocular manner using the rotary wheel in the middle. The thermal imaging camera also has a photo and video function with an internal memory of 16 GB. In combination with the app, live transmissions can be shared with fellow hunters or friends. The TQ50c is WIFI and WLAN capable. The protection class is IP67 and the thermal imaging camera is powered by two CR123(A) batteries. Charging via a power bank is also possible. When operating via a power bank, however, the charging cable of the device must be used. Under optimal conditions, the operating time is around 4 hours.

Specification:

Thermal Module
Image Sensor Uncooled Focal Plane Arrays
Pixel Interval 12 μm
Max. Resolution 640 × 512
Response Waveband 8 μm to 14 μm
NETD <35 mK (25°C, F# = 1.0)
Lens (Focal Length) 50 mm
Detection Range 2600 m
IFOV 0.24 mrad
Field of View 8.78°× 7.03°
Min. Focusing Distance 5 m
Aperture F1.0
Frame Rate 50 Hz
Magnification 1x

Image:
Display 1024 × 768, 0.39 inch, OLED
Palettes Black hot, white hot, red hot, fusion


System:
Reticle Yes
Hotspot Yes
Distance Measurement Yes
Record Video On-board video recording
Standby mode Yes
Capture Snapshot Yes
Hot Track Yes
DPC Yes
Uniformity Correction Auto, Manual, External Correction
Storage Built-in EMMC (16 GB)

Power Supply:
Battery
Replaceable
Applicable type: CR123A, RCR123A
Battery Operating Time 3.75 h (25°C, with hotspot off)
Anti-reverse Battery connection Yes
Overvoltage Protection Yes
Battery Capacity Display Yes
Type-C Power Supply
5 VDC, 2 A
Supports external power supply

Included:

Hikmicro TQ50c
USB-C cable
carry bag
operation manual

#FB14T

Suurendus:

< 5 x6 x - 10 x

Objektiivi läbimõõt:

43 - 50 mm

Maksimaalne töökaugus:

> 1501 m

Kaal:

401 - 600 g

Wi-Fi:

jah